結構式
CAS: 762-42-5
分子式: C6H6O4
分子量: 142.11
中文名稱: 丁炔二酸二甲酯
英文名稱: 1,2-bis(methoxycarbonyl)ethyne
2-butynedioic acid, dimethyl ester
acetylenedicarboxylic acid dimethyl ester
acetylenedicarboxylic acid, dimethyl ester
di(carbomethoxy)acetylene
性質描述: 無色液體。密度1.16，熔點-18℃，沸點95-98℃(19 mmHg)，折射率1.446-1.448，閃點86℃。
產品質量
分析內容 質量標準 分析結果
性狀 無色至淡黃色液體 符合
含量，% ≥98 98.56
灼燒殘渣，% ≤0.02 0.01
水分，% ≤0.5 0.32
用途: 用于有機合成。
其它信息：
Product Identification
【Product Name】Acetylenedicarboxylic acid dimethyl ester
【Synonyms】丁炔二酸二甲酯
【CAS】762-42-5
【Formula】C6H6O4
【Molecular Weight】142.11000000000001
【EINECS】212-098-4
【RTECS】ES0175000
【RTECS Class】Agricultural Chemical and Pesticide
【Beilstein/Gmelin】607063
【Beilstein Reference】4-02-00-02291
【EC Class】corrosive
Physical and Chemical Properties
【Appearance】Clear slightly yellow liquid.
【Solubility in water】Slightly soluble
【Melting Point】-18℃
【Boiling Point】204℃
【Vapor Pressure】0.3 (25℃)
【Density】1.1532 g/cm3 (20℃)
【Partition Coefficient】1.5
【Heat Of Vaporization】44.1 kJ/mol
【Refractive Index】1.4439 (20℃)
First Aid Measures
【Ingestion】Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
【Inhalation】Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration.
【Skin】Get medical aid immediately. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
【Eyes】Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Handling and Storage
【Storage】Keep away from heat, sparks, and flame. Store in a cool, dry place. Store in a tightly closed container. Corrosives area.
【Handling】Wash thoroughly after handling. Use only in a well ventilated area. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Do not ingest or inhale. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Hazards Identification
【Inhalation】May cause cyanosis, characterized by bluish-colored skin. Causes chemical burns to the respiratory tract. Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema.
【Skin】Causes skin burns.
【Eyes】Causes eye burns. Lachrymator.
【Ingestion】Causes gastrointestinal tract burns. May cause methemoglobinemia, cyanosis, convulsions, and death.
【Hazards】When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards.
【EC Risk Phrase】R 21/22 34 36
【EC Safety Phrase】S 26 36/37/39 45
【UN (DOT)】2810
Exposure Controls/Personal Protection
【Personal Protection】Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
【Respirators】Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions. Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
【Exposure Effects】Chronic inhalation and ingestion may cause effects similar to those of acute inhalation and ingestion.
【Poison Class】3
Fire Fighting Measures
【Flash Point】86℃
【Fire Fighting】Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Containers may explode if exposed to fire. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use agent most appropriate to extinguish fire. Cool containers with flooding quantities of water until well after fire is out.
【Fire Potential】Combustible material: may burn but does not ignite readily.
Accidental Release Measures
【Small spills/leaks】Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Provide ventilation.
Stability and Reactivity
【Disposal Code】1
【Stability】Stable under normal temperatures and pressures.
【Incompatibilities】Strong oxidizing agents, strong acids, strong bases, and strong reducing agents. Explosive reaction with 1-methylsilacyclopenta-2,4-diene at 150 C. Octakis(trifluorophosphine)dirhodium catalyzes explosive polymerization of the acid above 20 C.
【Decomposition】Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
【Combustion Products】Fire may produce irritating, corrosive and/or toxic gases.
Transport Information
【UN Number】2810
【Hazard Class】6.1
【Packing Group】I; II; III
【HS Code】2917 19 90
